Top

Manual Inputs: Simple Tips and Tricks

calendar_month Published On: Friday, April 30, 2021     calendar_month Updated on:
person Posted by: DressUp_Fighter_Online     rate_review 4 Comments so far
label Categories: ,

  • As a Beat-'em-up MMORPG game, DFO has a function that allowing you to manually assign commands to all your skills.
  • Here I'll go over some simple tips & tricks so you can get the most benefit out of this system.
Why Would You Use This?
  • You only have 12 quick slots. Well, every class in the game has at least 1 buff skills, among many many other skills. So you will not always have enough space to put them. 
  • Take Female Nen for example, she has at least 3 buffs that I cast at the beginning of every dungeon Khai.pngSun's Breath.pngTiger Flash- Nen Creature of Light.png. If I put those 3 on the hot bar, where would I put the other skills.
  • How about Female Spitfire, I need to cast 3 buffs Overcharge.pngBurst Bomb.pngAerial Fire.png, so there's no way I would have enough space for other skills if I put them on the hot bar. If you play sader classes, you will even need more manual skills.
How to Assign Manual?
  • First, click on a skill, then click "Change".
  • A window will open where you can put in whatever manual you in it.
General Principles
  • A manual input usually contain a set of arrow key and one letter.
  • So which letter can you use? There're only 4 letters you can use. They're letter used for "Skill", "Skill2", "Normal Attack", and "Jump" skills. You can see which those letters are under "Settings" then "Hotkey Settings".
  • As you can see, my "Skill", "Skill2", "Normal Attack", and "Jump" skills are Z, Space, X, and C. So I can only use those for manual input.
  • What do input usually consist of? In a nutshell, at least 1 arrow key & 1 letter. For example, most of my character's buff skills are "↑+Space"
    • You can register up to to 4 arrow keys, so go ham and be creative. You can use whatever input as long as you follow those simple principles. For example, "←↓→→ +C", "←↓→+Z, "↓↓↑↑+Space", etc.
  • Can you just put a letter? Yes, a manual input can just be a letter (for example, Z or Space). HOWEVER, you CANNOT use Normal Attack key and Jump key by themselves.
What Key To Avoid
  • I would say don't use the "Jump" key as an input because it can get confusing because sometime in dungeon, you want to jump to avoid certain gimmicks.
  • I would avoid using "→→ + Normal Attack" as a manual, especially if you're a gunner. Because that's the combination for doing run and dash move.

Which Skill?
  • Which skill should you use manual inputs? Generally speaking, buff skills are the ones you don't really want to put on hot bar. I put all my buff skill on all my character as "↑+Space".
  • High cooldown skills are good options, such a 1st 2nd or 3rd Awakening skills. I have the majority of my Awakening skills as "↑↑+C" and "↓↓+C".
  • For example: My female sader, I used "↓↓+C" for 3A, then when that's going, I used "↑↑+C" for 1A.
ProTip
  • Not many people know this, but this system can register an arrow as HOLD. On the command, you will see it register as "↑&" (right pic) instead of "↑+" (left pic).
  • To register this, simple press the arrow key, hold it for a few seconds, then register you letter key. Note that if you use this hold function, you can only use ONE arrow key.
  • Why does this hold function matter? Well, you can use this as a "combo" manual. In stead of using 2 different manuals for 2 skills, you can now just use 1 similar input.
  • For example: For my Female Nen, I used "↑+Space" for Khai.png, then "↑&Space" for Sun's Breath.png
    • Remember the Hold function? After casting Khai.png, because I already have my finger on the ↑ arrow (it will register it as a hold), now all I need is to press "Space" again for Sun's Breath.png.
    • So instead of using like "↑+Space" and "↑↑+Space" for 2 skills, I pressed "↑+Space+Space" and casted 2 skills spontaneously.
  • Here's another example using THREE skills: Overcharge.pngBurst Bomb.pngAerial Fire.png
    • I used "↑+Space" for Overcharge.png, "↓+Space" for Burst Bomb.png, then "↓&Space" for Aerial Fire.png.
    • Why the Down arrow? because after casting Overcharge.png, the Down function is "Neutral Bullet" which increases Skill attack.
    • So "↑+Space" to cast Overcharge.png, then since my finger already on ↓ arrow after picking the element, I pressed Space to cast Burst Bomb.png, THEN since my finger already HOLD ↓ arrow, I pressed Space again to cast Aerial Fire.png.
    • There you go, I pressed "↑+Space+↓+Space+Space" to cast 3 skills spontaneously like a pro.

4 comments:

  1. I've always used commands for my buffs but never knew you could use tap and hold, that was so mind blowing lmao.

    ReplyDelete
  2. the "↑+Space" then "↑&Space" tip is useful. Great job dude.

    ReplyDelete
  3. Wont let me enter a key after holding a arrow it just sits at arrow &

    ReplyDelete
    Replies
    1. Which key did you use? remember that when you do manual input, only certain keys can be used. See "So which letter can you use?" section.

      Delete

Popular Articles
About DFOArchive
A blog dedicated for all things DFO. Here you will find articles and pages that will help you progress through the game. Whether you're a new player or veteran, you will find something interesting here.